It took me two whole days, but I finally figured out how to work our new house’s old-timey stove.
It’s the first time I’ve fired it since we bought the house this summer. This thing is a lot more complicated than it seems. It has a main damper and a bypass damper, a separate air intake and it hadn’t been fired up for 6 months so the flue was full of cold air and humidity.
But crucially, it sits inside a northern house that’s so well insulated it’s airtight enough for the fire to pull a vacuum inside the house, snuff itself out and create enough of a backdraft to smoke up the entire house in seconds when all the windows are closed.
It took me a while to figure out how to adjust the dampers, stop the air extractor and crack a window open when I add a fresh log to avoid turning the whole family into smoked meat 🙂 But now the flue is warm, the draft is going good and the house is sitting at a balmy 82 degrees while it’s freezing outside.
Nice!
lol ITT, OP excited and everyone else telling them this is how they die.
lol ITT, OP excited and everyone else telling them this is how they die.
That’s the internet for you 🙂
Rip OP,beautiful stove tho
Waiting for:
eta: Hey, sorry folks, I kinda nodded off and it looks like everyone else is asleep, fire’s out…
“Where are all these Post-It notes coming from??”
Get someone to inspect and clean the chimney. They get creosote build-up that could start a fire where you don’t want it.
Wood stoves are great. I used to go home from school with a pack full of shorts. My Mom kept the house at 90F during the day.
The chimney is swept every year by law. Even if you don’t use the chimney, it has to be done, else the insurance company will use it to deny any damage claim - although I think maybe if the chimney is never used, it’s every 2 years.
Anyhow, the chimney sweep came just before we bought the house. It’s good.
You have an air extractor (like in the kitchen) and a fireplace? That’s a recipe for a disaster. Hope you have a CO detector.
I turned off the extractor. But this house got me confused, because the previous house we had was less well insulated, and the stove had no trouble breathing even with the extractor at full blast. This one though is much more airtight, and it took me a couple of hours to make the connection between the fire getting choked when I closed the window and the extractor pulling a vacuum. I turned it off and now it’s fine.
I do have a CO detector. Not a peep.
Maybe get a second one if you’re going to trust it with your lives.
One that actually reads the levels would be cool.
It reads levels, and it has a test button.
two is one, one is none. I suggest the YOLO - conspiracy theorist in a forest shack setup
You’re doing better than I am I’ve lived in my house about 4 years and still haven’t worked it out
The amount of soot above the door makes me think there’s a persistent draft issue.
- Is it a brick or steel chimney?
- How tall is the chimney?
- How far away is the tallest peak in the roof?
The amount of soot above the door makes me think there’s a persistent draft issue.
In fairness, the stove has been in daily use 6 months per year for 50 years though. I’m not too surprised that the surroundings are blackened.
It’s a brick chimney. It’s a single story house with a low roof. The chimney is maybe 3 feet above it.
And yeah, there is a draft issue. Or rather, it’s a ventilation issue, like in all houses around here: winters are harsh here, and it’s always a fine balancing act between keeping the warmth in and letting enough outside air in to prevent mold and humidity. And when you have a chimney or a stove, letting it breathe enough.
I suppose the soot is understandable given the level of use and an airtight house. I would think having an external air intake would help with that.
I wondered about the chimney height because I know masonry fireplaces have a minimum height requirement of ~3m(10ft). We have a huge double sided brick fireplace with a chimney that’s right at the minimum but oddly enough we never have any draft issues.
I’m not sure what the minimum chimney height is for stoves. Might be worth looking at having it extended by a couple feet or adding a draft inducer fan if you plan to burn a lot of wood.
I read that as the fireplace must be 10ft and not the chimney lol. Of course there are some bad ass ones this size but I wouldn’t like the horror movie that comes after the installation.
So which part do you put the children in? Is it hard to trick them into your gingerbread house?
Dude… That’s bleak 🙂
That’s the Grimm brothers for you.
I thought that was a doorway to an incinerator in a mortuary and that this was a meme. I’ve been internetting too long.
